Proposal to Eliminate Obesity

Stewart, M. June 13, 2011 Eng-106 Proposal to eliminate Obesity The fight against obesity is an ongoing battle; peoples all over the world are struggling to lose weight. Obesity is one of the most leading causes of death worldwide; this disease causes life threatening health conditions, such as high blood pressure, cardiovascular diseases, type 2 diabetes, arthritis, sleep apnea, strokes and cancer. The number of obese individuals throughout the world has doubled since three decades ago, which has become a high risk health factor in today’s society.Recent studies show that one out of every ten individual worldwide has been diagnosed as being obese. Despite the increasing obesity dilemma, studies indicate that some doctors find it hard to address weight issues with obese patients. Although, the doctor and patient know there is a problem, neither is willing to discuss it. This only makes the problem more complex later on, when it could have been resolved in the early stages. Wil liam, Bestermann Jr. , a medical director for Holston Medical Group in Kingsport, Tenn. states that â€Å"if doctors are committed to keeping patients from having strokes or heart attacks, then this conversation cannot be avoided, and they have to help their patients lose weight. † Bestermann has developed a plan for doctors to help guide and successfully treat obese patients on a committee for the Stop Obesity/Alliances, which consist of professional businesses, healthcare providers, unions and insurers whose sole purpose is to strategize an attack on obesity. Doctors have joined the fight against obesity, in an effort to win the war on obesity.Medical advisors suggest that primary care doctors launch a well-developed attack against obesity, in order to expand their patient’s lifespan due to the fact that it decreases their quality of life and also accounts for billions of dollars in health expenses. The most common reason for the excessive increase in health expenses ; there are about seventy-two million peoples in the United States who are obese, which enhances an evolution of chronic health conditions associated with obesity. If doctors and health insurance companies work together to discover an effective solution to eliminate obesity, this would save billions of nnocent lives. Preventive methods to help in the fight against obesity are inevitable due to the present circumstances. The Staff at the Mayo Clinic state that the purpose for obesity treatment is to help individuals reach and keep a healthy weight. A person seeking treatment should be monitored by health professionals, therapist, nutritionist, dietician, and an obesity specialist in an effort to maintain a healthier lifestyle. Obesity is a life threatening disease that causes other serious chronic diseases if not treated properly.Most peoples become obese by no fault of their own, due to psychological problems, lifelong illnesses and other distressful aspects in their life. My propos al based on my research is that President Obama, Congress and Healthcare Professionals should take a stand on this life threatening disease as soon as possible. The president can only do so much if Congress does not approve a bill. It is a tragic to see so many peoples in this world suffering and dying from any kind of disease that is in fact preventable. Obesity being one of them should be at the top of the list, because it is the main cause of all these other incurable diseases.If preventing or ridding the world of obesity is the key to optimal health, and expand a person’s lifespan. Why has Congress done something about it? Are doctors really concerned about their patients’ health? Some of our kids are even obese; obesity is a serious condition that most of us fell to realize. How can we say that, America is the land of the proud and the brave, if we as peoples of this great nation refuse to come together and take a stand on what is right? Obesity is an ongoing war that has hindered and defined our society far too long; it is time that we do something about this crisis, before it is too late.And our society becomes extinct. Peoples of this great land take a stand, in order to make a change we must come together. I am a firm believer in change, therefore by the will of God and myself, I will address President Obama and Congress on this issue to fight obesity starting today, because tomorrow is not promised to you or me. We have to live for today and help others in the process, who are unable to help themselves. I find this to be very disturbing that so many peoples in the world are obese. And nothing is being done about it. Society what has happened to us?Will we continue to sit back and do nothing? Even if Congress have to pass a bill for an effective method to fight obesity, than they should. For every man, woman and child that are diagnosed as obese, effective immediately they should be offered weight-loss surgery. Many in the past have died because they were obese; this is not something Congress does not know about. Some obese individuals reach out for help from their physicians; the answer to their consistent weight gain problem is to stop eating or exercise more. This is the solution to end obesity, not applicable.Are doctors failing to save lives? Do they offer the best health advice to patients? I have to admit a doctor’s job seems a little overwhelming, with the enormous amount of patients that they see and treat daily, but if you cannot trust your own doctor in regards to your health issues, who can you trust. If doctors know of any cures to save millions of life’s yearly. Are they entitled to share their findings with patients? References Greene, C. , & Hellmich, N. (2009, October 06). Doctors join fight against obesity- USATODAY. com.News, Travel, Weather, Entertainment, Sports, Technology, U. S & World-USATODAY. com. Retrieved June 15, 2011, from http://www. usatoday. com/news/health/weightloss/ 2009-10-06-doctors-obesity_N. htm Staff, M. C. (2011, May 06). Obesity: Treatments and drugs-MayoClinic. com. Mayo Clinic. June 13, 2011, from http://www. mayoclinic. com/health/obesity/DS00314/DSECTION-treatments-and-drugs Reeves, R. (2005) Working Together to Fight Obesity. Journal of the American Dietetic Association, 105(5), 13-13. doi:10. 1016/j. jada. 2005. 03. 018

And Still We Rise Essay Essay

It is a unique experience to be rendered completely helpless, to be put completely at the mercy of another human being by force. I have felt complete submission of this kind once in my life; I lay on the cold, wet grass, confused, slowly regaining consciousness after being choked out. As I look back on how I have lived my life over the past couple years, this incident is one of the most influential factors. After being so overpowered by another man, I decided that I could never let this kind of thing happen to me again. I became extremely motivated to lift weights, and to learn wrestling and MMA. This experience changed my expectations for myself and helped me realize that it is in my hands to decide how I am perceived. It was a dispute over nothing. Two guys, driven by a natural instinct to fight, finding an excuse to challenge each other. These two guys were me, a scrawny, 100lb 8th grader, and Collin a well built 22 year old. We were sitting around a bon fire with five other friends, but only six fold-out chairs. Collin suggested tap out to decide who got the last chair, and the next thing I remember is the utterly confused feeling as I regained my senses one by one. It was a full minute before I really knew what had happened: unable to break a choke hold, I had refused to tap out and collapsed unconscious on the ground. It is hard to describe the mix of relief and humiliation that I felt as I walked away from the incident. Even though I trusted and respected Collin, he had just proved my vulnerability and made me realize my lack of confidence. I did not, however, accept my defenselessness and move on. I realized that there was no reason for me to have settled for my skinny pathetic build, and I hit the weights. I started lifting six days a week a friend of mine and within three months, had put on fifteen pounds of muscle. A full year later, I weighed 155 and bench pressed over 200lbs. This incident is also one of the main reasons I started wrestling, a sport that I have grown to love and excel in. To complete my self-improvement plan, I took a few MMA classes and got some sparring equipment and a heavy bag to practice on. Since then, I’ve spent hours in my garage letting my anger out on that bag to staying in wrestling shape. Of course I am no were close to my vision for myself, still only 5’ 8†, and well below my goal of muscular development, but I can see that it is possible. This whole process has taught me that I am I control of my own destiny. Any goal is attainable if you work for it, and what doesn’t kill you makes you stronger. This event was not the only factor contributing to my decision to change, I hated being skinny. It was however an incredible catalyst, giving me a specific reason around which to focus my efforts. It made me realize that you are born with no restrictions. No matter what your natural conditions are, they can be changed and formed to fit your ideals. Furthermore, it’s up to you to change them and the effort you put in will be directly reflected in your outcome. This experience brought to light that, when I have a goal in mind, I am incredibly motivated and focused. It has shown that I can maintain interest in a goal and continually set the bar higher and higher. This experience has changed the way I perceive and carry myself. It has shaped me into someone who is comfortable with their abilities and willing to work to improve themselves. It has shown my ability to let setbacks help me grow and demonstrated my strong self motivation. Ultimately, I am very thankful for Collin and what he did for me, in a sense, being completely helpless has been one of the most empowering situations of my life so far.

Network Hardware Essay

Choice of good network hardware will depend on a number of factors. First it has to be planned properly to allow growth without adversely affecting future business. The design of the network should ensure sufficient performance, availability and security. All this aims at providing enough information and processing of transactions for all its users. A list of users who will access the net has to be generated so as t determines the capacity the hardware will be able to support. A list of severs that need network connection should also be developed. Mid and high end servers should be selected. Server consolidation should be prioritized as a means of minimizing costs. The company will save much on power and floor space. It will also reduce administrative and maintenance costs. The various host machines that need to be supported by the network should also be determined and assigned specific names and IP addresses. The type of host will determine the design of the network. The network media has to be compatible with the available servers and host machines to be supported by the network. In this case I would recommend Ethernet cables because they are of its lower cost and easy manageability. There is also need to plan for bridges, hubs, routers, or switches. These devices come into use during connection of various subnets on a network. Routers for instance when connecting different domains within a network, offer better administrative control over network traffic. A good network topology should also be created so as to provide sufficient network resources for all applications. A hierarchical network is preferred with the trunk at the top and the hosts at the bottom.

Adolescents are not in turmoil,not deeply disturbed and not resistant Research Proposal

Adolescents are not in turmoil,not deeply disturbed and not resistant to parental values - Research Proposal Example Adolescence is commonly perceived as that stage of physiological, mental, and emotional development between childhood and adulthood. Generally taken as the â€Å"pre-teen† to â€Å"teen† ages, usually at the onset of puberty until about 18 or 19, the period of adolescent development pertains to a rather diverse range of determinant influences including social, environmental, religious, even cultural factors for the concept to be framed in more definitive terms. In this paper, the context adopted by the American Psychological Association (A.P.A.) in its scientific publication titled â€Å"Developing Adolescents: A reference for Professionals† shall be, likewise, adopted: â€Å"There is no standard age range for defining adolescence. Individuals can begin adolescence earlier than age 10, just as some aspects of adolescent development often continue past the age of 18. Although the upper age boundary is sometimes defined as older than 18 (e.g., age 21 or 25), there is widespread agreement that those in the age range of 10 to 18 should be considered adolescents.† (p. 2) The stage of adolescence is definitely the most exciting period of most everyone’s life. The period of discoveries and learning on your own, the time of exciting encounters and relationships, of heightened interests in new and more exciting things than dolls and matchboxes, it is that time in our lives that almost every adult, if not every adult, would look back to with fondness and great relish. It is the period of our lives when we looked at everything in the world with more intense interest and passion. Child psychologist Gregory Ramey at Dayton Children’s in his Dayton Daily News article titled Adolescent Turmoil writes, â€Å"Teens feel the world so passionately. They live life differently from the rest of us. They experience intense sadness at things that appear trivial and escalate to extreme excitement at seemingly insignificant eventsâ€Å". He continues further, â€Å"They enjoy

Unit 9 db Research Paper Example | Topics and Well Written Essays - 250 words

Unit 9 db - Research Paper Example Therefore, to deal with such pitfalls, I would like to recommend that the manager should not have used a phone to communicate such an official message. Instead, he would have used an email, written a letter or insisted on face-to-face communication. This would give him an opportunity to formalize the communication or get a chance to engage Lei on a direct communication. Besides, I would like to recommend that Lei should have given out clear responses to the manager. She should not have merely stated her answers without explaining it. This confused the manager since he could not clearly understand her (Terry, 2008). Lastly, I would recommend that Lei should have not given an immediate response to the manager. Because this was a very sensitive matter, she should have taken time to synthesize the message and consult the relevant stakeholders before giving out a conclusive response (Argenti, 2009). If she could have done this, she would not have conflicted with the manager for bringing her the invoice for the new equipment whose purchase would be a costly affair for the

Auschwitz Research Paper Example | Topics and Well Written Essays - 1000 words

Auschwitz - Research Paper Example Auschwitz is enough reputable for its concentration camps and gas chambers used to kill people, however, the number of people murdered at this location is still unknown. Auschwitz contained gas chambers and prison cells that were used for discharging gas and confining prisoners and were made the prison house of Jews as well as non-Jews (Gutman and Berenbaum 119). This paper analyzes the place as an extermination place and evaluates the information given for Auschwitz. Auschwitz as an extermination place was constructed especially for prisoners and gas chambers were there for exterminating the prisoners. The gas discharged inside the gas chambers due to which, the people held as prisoners inside the gas chambers got suffocated and poisoned because of the discharged gas (Cesarani and Kavanaugh 67). As discussed in the introduction that Auschwitz was divided into three sections, out of which, Auschwitz I was the main camp and the remaining two were its extensions. Auschwitz I was used a s administration camp and all the actions related to prisoners were controlled from this place. The prisoners were made to work without giving any heed to their physical condition. Not only Jews but also non-Jews were exterminated in these camps (Cole and Smith 1992). In my opinion, the camps that were constructed were made for punishing prisoners and this punishment was very severe as prisoners were not only enforced to do hard jobs but also murdered during their confinement. There were no rules or regulations regarding the prisoners and they were deprived of their due rights. The people who say that all these extermination stories are wrong are not right as there were many proofs for massive extermination of people. The main camp, Auschwitz I was already present in the area before World War II and was used as barracks for Polish army (Gutman and Berenbaum 136). The people who were kept in prison were required to do rigid jobs with no hygienic care due to which, death rate of priso ners started to augment. According to Wittmann (2003), the most awful attitude was kept with prisoners who were Jews or Soviets and special marks were also printed on their clothes to categorize them separate from others (82). Some special blocks were assigned for prisoners with more severe crimes and the prisoners were not allowed to sit, as they were to stand all nights and work all days. Prisoners were also deprived of any food or water until they got dead because of unavailability of food and water. Along with these kinds of ill-treatment with the prisoners, the prisoners were also gathered and gassed by discharging Zyklon B from the ceiling (Cesarani and Kavanaugh 141). Therefore, not only gas chambers but also other ways of killing people were utilized. Like the first main camp, the extended camp, Auschwitz II or Auschwitz-Birkenau was also used for holding prisoners captive and for murdering them. Auschwitz-Birkenau was constructed larger than the main camp and was mainly use d for gassings as gas chambers were created there for prisoners and the gas that was used was Zyklon B (Rees 49). According to Rees (2005), the gas chambers were constructed with bricks and were named on the basis of the color of bricks used for constructing the chambers such as there were ‘Little Red House’ containing red bricks and ‘Little White House’ containing white bricks (54). The chambers were locked with air tight doors and any opening was ensured to

Media literacy should be taught to boys ages 6-12 to understand the Essay

Media literacy should be taught to boys ages 6-12 to understand the dangers of professional wrestling - Essay Example Since there is no filter available that can discriminate what content suits what age bracket, therefore the impacts can be quite adverse. Media literacy education is very essential because it will help children to discriminate the content on their own and would eventually help them to choose what is feasible for them. The age bracket from six to twelve years is very fragile where a child adapts a lot thus it is very important to assist them and provide them with the basic knowledge so that they do not implement what they see. Thus it is very important to inculcate media literacy amongst young children so that they understand the adverse impacts of professional Wrestling."By its very nature, professional  wrestling promotes violence  as a reason to watch. With all the  brutality in this world  Zillmann and Bryant (1994) argued that audiences, especially  children, seek out arousing entertainment to relieve boredom." (Oppliger, 2004) Firstly professional wrestling has evolved tremendously since it has been given the criteria of a sport. This sport has another very important side to it, which is the entertainment factor it provides. When young children have access to wrestling they not only get enthralled by the entertainment factor but also the stunts done leave a very profound impact on their mind. They develop this wrong approach that they can practice the same stunts at home, school or other places. They do not realize that the stunts performed there are under strict supervision and are a result of intense practice. Without any supervision or practice the young children involve in wrestling activities which can result in serious injuries and damage to health. When children are not educated about the adverse impacts associated with wrestling they will not only damage themselves but others as well. Furthermore it needs to be realized here that children adapt whatever they see. Hence it is very important to educate them about wrestling so that they do n ot implement what they see. Secondly another issue that can arise if young children have access to professional wrestling is that they learn to use abusive language. "any greater degree of violence than is occasioned by blows,  wrestling, and pulling of the hair; and their  abusive language." (Rees, 1905) These matches it has been observed that the wrestlers tend to use such abusive terms which are not suitable for the young minds. Many a times it has been seen that children use the language they learn from these wrestling at home; school etc. and when they are asked from where they learned such language they usually blame wrestling. Children who are belonging to the age bracket of six to ten are at a stage of developing. Their reflexes are becoming sharper and their cognition is developing. During this phase if they start to learn such abusive language that will always have a very drastic impact on their overall upbringing. These words are then used at various instances reflect ing their learning from these wrestling programs. Language is very important when it comes to young children and if they do continue to watch such programs which promote abusive language then the impacts can be quite adverse. Thirdly another major danger that can damage the young minds is the propagation of vulgarity, profanity and female adolescence.These shows have become an emblem of vulgarity. Young children

Object Essay Example | Topics and Well Written Essays - 750 words

Object - Essay Example The cup seemed to follow three geometrical figures, of a cone, a circle and a triangle. The main portion of the cup reminded me of an inverted cone though unfinished towards the cup’s base, thanks to the circular shape that is needed to balance its weight. The handle of the cup stood out from usual designs, by its triangular shape. The size of the cup made me apprehensive of its practical use, of holding it filled with tea, as it was just 10 centimeters tall and 7 centimeters in diameter. However, I was willing to buy it even as a showpiece, and the prize was not exorbitant. I just made sure in the shop that my two fingers can be inserted in the handle and that the cup does not tilt when I hold it. When I reached home, I tried using it as a teacup and was glad to find out that even with tea filled to its rim, the cup does not tilt, and the shape of the handle distanced my fingers from direct contact with the surface of the cup immediately near the hot content inside. The design is proportionate and pragmatic. The small base and expanding mouth of the cup is complemented by its triangular handle, expanding with the shape of the cup towards the tip. The color design is also in accordance with the shape of the cup. The predominant color, yellow, makes the cup look bigger than it is and the circles among the yellow surface and the border at the top in bright red color gives it the grand look that can be achieved only with the judicious bland of colors and shapes. To emphasize the handle, the yellow and red combination does not apply to its base and is instead painted white. The outer portion of the handle is yellow in color, while its inner portion is white. The bright red border extends to a very small portion of the inner surface of the cup, decorating its rim. The inner portion is a pure, spotless white. One functional aspect that I discovered about the extension of the red border

BUSINESS STRATEGY Essay Example | Topics and Well Written Essays - 2000 words

BUSINESS STRATEGY - Essay Example Strategy is the other term for business planning to obtain competitive advantage in the market and to analyze the future events to operate successfully in uncertainty. The business strategies of an organization aim at bringing out strategic decisions about the choice of products, customer needs, and new opportunities in the terms of market and technology and other important decisions which help the firm to gain a competitive advantage in the market. The business houses cannot take appropriate and important decisions without the availability of the complete information of the external environment. Business organizations cannot run in vacuum and it has to involve the external environment. There are many related parties to the business like the customers, society, environment, employees, creditors etc. It is very important for the firm to have a complete knowledge about its internal and external environments. A thorough study of the internal and external processes of the organization helps it to understand its strengths by establishing the points or the areas where the organization is good at as well as understanding its weaknesses, the areas where further improvement is required. This analysis would further help in understanding the external environments to understand the scope of the organization in the future. The strategic planning and recommendation requires the thorough understanding of the internal environments of the organi zation so as to plot the strategies accordingly, for the maximization of the benefits drawn from the strategies. The stake holders of an organization play an important part in the policy formation and implementation of the strategies.

Public education vs. home school Essay Example for Free

Public education vs. home school Essay Deciding which is better between public education and home schooling may often cause a debate. There are similarities between them, such as both being a good source of education for students. However, there are a few differences. For instance, home schooled students may graduate earlier than public schooled students while public school has more to offer. Even though home schooling has an advantage, public education is a better educational experience because of the opportunity, social skill development, and the things a student can learn from being in a class size of more than one. While home school may give a student the opportunity to graduate early, public schooling offers many more memories and opportunities that the students will cherish. When attending public school, students are given the opportunity to earn scholarships to help them further their education and continue working on their talents, depending on which way they earn their scholarship. They are given different ways to earn them such as playing sports, getting good grades, and being involved in musical activities. A student attending public school gets a chance to make priceless memories that they cannot get back. The ways that they can earn scholarships also play a part in creating memories. It is going to be a great feeling to be able to look back and tell stories to their loved ones. They will want to share how they got trophies and so much school recognition when they were the starting quarterback or the number one batter on the softball team or even the drum major for the high school band. Students also cannot get letterman jackets being homeschooled while the students in public school is able to get their name and their accomplishment patches on their very own letterman jacket. Each year, students are given a yearbook to look back at pictures they took with their friends and the group activities in which they were involved. There is nothing better than transporting back to the younger days while flipping back through the yearbook as an adult. Also, a certain piece of jewelry can put a smile on the face of an adult as they reminisce. Having a class ring as a souvenir is such a wonderful treasure. Graduating is such a significant accomplishment and students are going to want these memories and something to show for their achievements. Some students do not think having a diploma is not enough. It does not get better than having a class ring to go along with scholarships, letterman jackets, yearbooks, and the cap and gown. When students attend public school, they are learning  life lessons, and while they do not realize it, it pays off in the future. Knowing how to be around all kinds of different people on the daily basis is very beneficial to the students as they develop. Students that are home schooled are not around unfamiliar people, such as new students, new teachers, others that are different from them, and substitutes on a daily basis and this can affect them socially. There will be students that do not get along and students that have to work in groups who may not be too fond of each other, but being in public school will help those students learn how to cope with uncomfortable situations. In the outside world and the future workplace, there will be similar situations, and they will be able to apply the skills that they learned in school to these situations. Having social skills is not just about having friends, it is about knowing how to speak to anybody the proper way at any given time. Having good social skills and knowing how to speak is going to follow the students in their futures. For example, when they go apply for a job, and they are offered an interview right on the spot, they need to know what to say and how to say it. Home schooled students are limited while public schooled students are benefiting quite well from this daily, making public school the better place for students to get an education. A lot of people might say that having a class size of one will help the student learn better and more than the students in a classroom of an average of about twenty-eight people. However, there are a few things that the students can learn from being in a class size of more than one. Patience is one of them. In a class size of one, students are only used to being by themselves and being answered right on the spot. In classrooms of more than one, on the other hand, the students learn patience when they have to wait for their turn. They also learn how to be patient with other students. Not knowing how to be patient can create a sense of selfishness which can give them somewhat of a bad image in the real world. The students also learn how to work in groups with different people that carry different attitudes and personalities. Patience and good social skills can help get through a group project. When working in groups, it can be difficult, especially when every student of the group has t heir own ideas and do not know how to handle the situation in a cordial manner. The work has to get done, and them knowing how to work together is going to go a very long way. There may be a time when a student meets someone in public that  could give them a big opportunity. A student that knows how to speak in a professional tone instead of being shy will have a good chance of getting the chance to take advantage of that opportunity. Public school will teach more lessons than home school giving the students an advantage when it is time to handle different situations in life. Having a class size of one is okay. However, students need to learn how to work around and with others and still get their work done. Students will appreciate the memories they can create and other opportunities that they can earn from getting a public education. The educational experience is more than just learning the schools curriculum. Being home schooled can teach a student the curriculum along with basic things that they would learn at home while public education can teach more than just that such as life lessons that they will need in the future.

Factors Affecting Textile Industry

Factors Affecting Textile Industry The research reported in this thesis was on Factors affecting the growth of the Textile Sector. The purpose of research was to study the micro-environmental factors affecting the growth of the textile sector so that the effect of the macro-environmental factors that plague the textile sector can be countered. The secondary data was collected by consultation of literature in the libraries and the internet and also from the material printed by different organizations of Pakistan. The findings suggested that among other variables that affect the Growth of Textile Sector such as number of looms, Raw Cotton production and Raw Cotton consumption, the variables Yarn Production and Number of Spindles have a significant impact on the growth of the textile sector. CHAPTER 1 INTRODUCTION This thesis identifies the micro environmental factors that have a major impact on the Growth of the Textile Industry. These factors include all those elements in the immediate area of operations of the industry that affect its performance such as production, consumption and supply of raw materials. The textile sector or textile industry is defined as the industries involved in designing, manufacturing, distribution and use of clothing. The textile sector is technically considered to be growing or flourishing; if the textile mills are producing cloth at an increasing rate or the contribution of the textile sector to the GDP of the country is increasing (i.e. production of cotton cloth is increasing in the sector). Hence, the relationship linking the growth of the textile sector with the production levels of the cotton cloth in the industry. The GDP of a country is defined as The Total Value of Goods and Services Produced in an Economy, so if the quantity of cotton cloth production is increasing or decreasing in Pakistan that directly goes to show that that the share of economic contribution of the textile sector to the GDP of Pakistan is growing or declining respectively. There are varieties of variables both macro-environmental and micro-environmental that affect the performance or growth of the textile industry such as the political, social, legal, economic and environmental issues. The textile sector or any other sector for that matter can only flourish or grow if the policies of the government support the operations of the industry on both the micro-environmental level and the macro-environmental level. For instance if the government policies regarding the industry are detrimental to the cause such as putting a quota to the amount of cloth that can be exported to other countries or on a more fundamental level of the supply chain, restricting the type of cotton that can be used to produce cloth in the mills or if the costs of financing the expansion is highe r such as the conditions prevalent in the economy that would also result in a negative impact on the growth of the textile sector or if the inflation rate is beyond the predicted levels that would also cause the Pakistani cloth to lose its competitiveness in the markets, both local and international. The macro-environmental factors affecting the textile industry are tremendously diverse such as the illiteracy rate that is prevalent in the country and the trouble it causes in the form of resistance by individuals working in the factories and mills to adopt newer methods of production and technologies, to the investment insecurity that is present in terms of a declining economy partly through poor government policies regarding businesses and partly through the prevalent global recession that discourages the international investors to invest in an economy that is one of the biggest producers of textile products, to the physical insecurity that is present due to the law and order situat ion. This thesis however would be discussing the micro-environment variables that affect the growth of the textile sector. The Textile sector is a major contributor to the economy of Pakistan; hence, it is vital to study the factors affecting the growth of this major industry because it reflects the state of the economic health and macroeconomic policies that govern the state. The textile sector growth is dependent on a number of variables. The raw cotton production and its level of consumption affect the final product in the form of cloth. The level of consumption if important because it specifies the quantity that stays in the economy or in other words, is not exported to other countries. The number of looms and spindles is another major factor affecting the production of cloth because the larger the number of looms and spindles producing the cloth and yarn respectively the higher the produce of the textile sector is going to be because the yarn production is ultimately in used in producing cloth. All these factors affect the production of cotton cloth. CHAPTER 2 LITERATURE REVIEW The changing profile and map of the EU textile and clothing industry, this article talks about the changing structure of the European Union textile and clothing industry. Some of the main reasons it mentions for the change include markets with often unstable and rapidly changing demand, limited product range and subject to rapid obsolescence and limited scope for economies of scale. EU still accounts for a large share of world exports and employment despite increasing competition worldwide. Some of the textile and clothing firms were focusing on simply the design and marketing and sub-contracting or out sourcing manufacturing, others focused on creativity, design and the making and selling through their own networks. Due to the absence of economies of scale firms tend to remain small, while small firms in turn have limited access to finance. So all of this leads to why the textile industry remains a particular small size in the EU, failing to increase beyond it. (Dunford, 2002The Changing Profile and Map of the EU Textile and Clothing Industry). Skills and competitiveness: Can Pakistan Break out of the low-level skills trap? This paper argues that Pakistan needs to dwell into the higher value added, skill intensive and technologically advanced sectors instead of the current low-level skills trap. Currently Pakistan is only focusing on growing cotton and increasing it yield but that is not enough if Pakistan has to compete with a technologically advanced world. The main challenge to do that is to change the mind set and develop institutions which recognize the value of investing in people. (Rashid Amjad, 2005 Skills and competitiveness: Can Pakistan Break out of the low-level skills trap?) Demand for textile and clothing exports of Pakistan, this article states that textile and clothing remain an important element in economic development of countries and in Pakistan it is the largest industrial sector with respect to investment, employment and export. The paper highlights various agreements which enhanced the access of textile products of country to various markets around the world. It compares the performance of textile industry of Pakistan with other developing countries in terms of exports. The major buyer of Pakistan textile products is U.S.A. Though the share of Pakistans exports in world market has increased to 1.1%, other developing countries had a substantial increase of upto 5%. The paper states the features of Pakistan textile industry that major chunk of yarn produced in country is exported in its raw form where it can be utilized for production of quality products such as fabric. Despite having the advantage of cotton and yarn production of superior quality the industry faces challenges in form of lack of investment, capacity and qualified workforce. The paper builds a model on the textile industry of Pakistan and provides with the policy recommendations in form of massive restructuring in this liberalized and competitive trade environment. This article focuses on the textile industry of Pakistan for it has played an important role in the economic development of this country, therefore it needs to be built upon and undergo massive restructuring to become capital intensive like it has been in the west for a while now. There is a need to focus on the quality of finished products instead of spinning activity. The finished products include production of the fine quality cloth in textile mills. Reliance on low technology power looms for the production of fabrics should be reduced and the number of shuttle less looms should be increased which have the capacity to produce wider width superior quality fabric for the international market. The reason for focusing on the quality of finished products and the development of quality cloth which is at the end of the manufacturing process is because apparels/garments provides the highest value added product among the textile items, therefore maximum focus should be towards the units producing garments, however, the increase in cotton prices resulting in proportionate increase in yarn price coupled with the increase in the cost of other inputs such as financial changes, electricity, labor, etc. has crippled the financial viability of the shuttle less weaving sector in Pakistan. To switch to more capital intensive production in the textile industry, Pakistan needs to add sufficient well developed infrastructure in terms of communication, services, export procedures, appropriately trained manpower, material inputs and transport facilities. To increase the Pakistans share in the global market would otherwise be difficult. The article gives the examples of Hong Kong, South Korea and Japan. Pakistan has nearly 15000 looms whereas countries like South Korea and Japan has more than 50,000 looms. But there is more to them than just numbers. Developed countries depend more than anything on the supply factors of international competitiveness. E.g. only low wages cannot guarantee a cost advantage in textile production but there are many other factors like low capital costs and low energy costs. (Afia Malik, 2005 Demand For Textile And Clothing Exports of Pakistan). Aftab A. Khan and Mehreen Khan in the article Pakistan Textile Industry Facing New Challenges highlight the importance of textile industry of Pakistan as one of the most contributing industry to the countrys GDP. It identifies the major variables resulting in the decline of industry which includes global recession, internal security threats, high cost of production, higher financing cost, depreciation of rupee, and inflation rate. The paper provides with statistics on textile industry of Pakistan and suggests that 60-70% of machinery needs replacement in order for attaining better quality of production and cost efficiency. The downfall of industry contributed by the severe energy crisis in country, along with the financial crunch and devaluation of rupee lead to higher costs of products imported for production purposes. This all lead to unemployment in country and decline in textile exports. The paper provides with the hope that textile industry can b revived and rebuilt if governmen t supports the industry and certain measures are taken for its betterment. It includes subsidies, awareness programs, energy alternatives, trainings and exploration of new potential markets. (Aftab A. Khan, Mehreen Khan, 2010 Pakistan Textile Industry Facing New Challenges). Industrial Organization and Technological Change: The Decline of the British Cotton Industry, this article by William Lazonick again focuses on the fact that failure to adapt to and compete with the changes in the international competition. The British industrialists were divided amongst themselves and failed to identify the structure and economic conditions of international competition. This study of the British cotton industry suggests that a fundamental cause of Britains relative decline from the late nineteenth century was the inability of its capitalists, divided as they were by competition and markets, to adapt Britains nineteenth-century economic structure to the conditions of twentieth-century international competition. The structure of industrial organization which arose in the context of Britains unchallenged domination of world markets in the mid-nineteenth century left the subsequent generations of capitalists powerless, both individually and collectively, to supersede th e market so as to develop the coordinated managerial structures and introduce the high throughput production processes that characterize the modern capitalist enterprise. The article Hike in POL prices to raise cost of production from the Pakistan Textile Journal, Feburary-2010 issue highlights the adverse impacts of increase in petroleum prices on the textile industry of Pakistan. The article speaks on the problems faced by the textile industry of Pakistan throughout its existence. It states that with an impaired perception of being a terrorist state, the export based economy has suffered to a greater extent along with the global recession. Moreover with less buyers aiming Pakistani textile markets and economic turmoil has forced the textile exports to go down by 30 to 40% in a time span of 3 years in quantity terms, along with an additional negative growth in all sub sectors of textile industry. Rising inflation, lower investment rate in textile sector, rising mark ups with higher cost of production and power outage with higher energy costs, all rendered to a greater trade deficit for country and less international demand in last few years. The expo rts in 2008-2009 slumped to $ 9.95 billion where the target was of $ 12 billion. Lastly it states that along with all issues faced by textile industry of Pakistan, power shortage and higher petroleum prices would further increase problems for the industry as it will make products less competitive and increase the cost of production as prices of all commodities will shoot up. http://www.ptj.com.pk/Web-2010/02-10/Islamabad-Outlook.htm The article Pakistan faces a severe textile crisis is a statistical report from emerging textiles.com 6th December, 2006, ponders on the situation faced by Pakistan textile industry. It states that Pakistan textile industry has experienced a double digit growth which is now over and several factors have contributed in this decline of textile industry, though the government has provided with an initial research and development funding to support the industry but rising energy and financing costs could not prevent the industry from a severe crisis. It also highlights the increasing competition faced by other textile exporting countries like India, Bangladesh, China and Vietnam with their low cost products. Import tariffs on textile products and shifting from the policy of utilizing more yarn of country for value added products to export of raw yarn has again intensified the crisis situation for the industry. The article provides with complete statistics of Pakistan textile exports from July2005 to June 2006. http://www.emergingtextiles.com/?q=arts=060906Pmarkr=freen=1 In another article of Report on Textile Industry of Pakistan it claims that the reasons for the decline of textile industry of Pakistan include rise in the rates of (EFS) export finance scheme from 8.5% to 9.5% which is a rise of a 100 basis points. The second major reason it mentions is the rise in energy tariffs adding to the low availability of the electricity. Adding to that was the fact that refineries could not provide furnace oil in the required quantity to the power generation companies which led to the low working hours of the textile mills directly or indirectly. Another major blow came from the rise in yarn prices, the raw material feeding the textile mills. The cotton prices increase from 2000 to 6600 per 40 kg due to the export of yarn, the yarn export will amount to 614 million kg (which represents 14% of textile exports in 2010 versus 11% in 2009). Some of the other factors influencing the textile industry include increase in minimum wage, Double freight for Punjab Khyber Pakhtunkhwa textile mills, Lack of transportation facilities and Tariffs trade agreements. (Yasin Ahmed, 2010 Textile Industry of Pakistan) In another article Pakistan lags behind in Technical Textiles it is argued that the technical and economical impact of technical textiles in the industrially developed countries and their future contribution to the development of economics of newly developing countries, such as China, South East Asia, and North Africa etc. Pakistan still lags behind in technical textile products as neither the government nor the textile industry has made any serious efforts towards synchronizing textile products with the emerging needs of the world market by developing higher value-added products. Although the textile sector is the backbone of Pakistans economy, the Government as well as the textile industry has kept their focus on conventional textiles, ignoring technical textiles and knowledge-based products. (Noor Ahmed Memon, Noor Zaman, 2007 Pakistan lags behind in Technical Textiles). In this last article of Development of Textile Industrial Clusters in Pakistan it mentions the reasons for decline of the cotton industry as outdated technology, poor machinery, lack of skilled labor and reliance on the traditional Ustaad-Shagird mode of training and due to which there is a high defect rate. (Muhammad Shahzad Iqbal et al., 2010 Development of Textile Industrial Clusters in Pakistan) CHAPTER 3 METHODOLOGY Research Type The research is quantitative in nature. Basically it takes into consideration the data which is numerical in nature and the relationship purely depends on the data figures of the variables such as Number of Looms, Number of Spindles, Yarn Production, Raw Cotton consumption and Raw Cotton production. Data Type Research Period This research is solely dependent on secondary data analysis. Multiple Regressions would be run on the data of Number of Looms, Number of Spindles, Yarn Production, Raw Cotton consumption and Raw Cotton production. Sources of Data Data on Number of Looms, Number of Spindles, Yarn Production, Raw Cotton consumption and Raw Cotton production will be collected from World Development Indicators, Economic Survey of Pakistan and APTMA. Dependent Variable: Factors affecting the growth of the Textile Sector Independent Variables: Number of Looms Number of Spindles Yarn Production Raw Cotton consumption Raw Cotton production OPERATIONAL DEFINTIONS Textile Sector The textile sector or textile industry is defined as the industries involved in designing, manufacturing, distribution and use of clothing. Although there is no one known way of measuring this growth. Sometimes the quantity of export of cloth is taken to be a measure of the growth of the textile sector but technically that there is no one way because there is a huge amount of informal sector that goes unrecorded in the textile sector. The textile sector in this thesis is considered to be growing or flourishing; if the textile mills are producing cloth at an increasing rate or the contribution of the textile sector to the GDP of the country is increasing (i.e. production of cotton cloth is increasing in the sector). Yarn Production Yarn production basically refers to the quantity of thread that is being made using the cotton that is grown and harvested. It is the total quantity of the Yarn that is being produced in an economy. It is a direct measure of the Thread that is being made from the cotton that is collected and further down this process of the supply chain the cloth is being produced from this very Yarn. Yarn Production is measured in (000 Kgs). Generally it should have a positive impact because this independent variable is directly related to the dependent variable. Cotton Production Similarly the cotton production is simply the amount of cotton that is being produced in an economy. This should also have a direct effect on the growth of the textile sector since both are positively related as the cotton production would go up so would the growth of textile sector. Cotton Consumption This variable basically measures the quantity of cotton that is being produced and consumed in the local economy. Since Pakistan is a cotton producing country, this variable measure the quantity of cotton that is being consumed and processed by local ginneries and mills instead of being exported as Raw Cotton to other countries. Technically this should have a positive effect on the growth of textile sector as cotton consumption in the local economy goes up so would the growth of textile sector. Number of Spindles This variable basically refers to the quantity of Yarn producing spindles that are operating in the economy. This should also have a positive relationship between the growth of textile sector because as the number of yarn producing spindles goes up so does the ability of the mills to produce cloth and hence the growth of the textile sector. Number of Looms This is similar in nature to number of Spindles; the only difference is that it measures the quantity of cloth producing Looms that are being used in an economy. If the Number of Looms would increase so would the cloth production and the growth of textile sector HYPOTHESIS Yarn Production H0: There is a significant relationship between Yarn Production and the growth of textile sector H1: There is an insignificant relationship between Yarn Production and the growth of textile sector. Cotton Production H0: There is a significant relationship between Cotton Production and the growth of textile sector. H1: There is an insignificant relationship between Cotton Production and the growth of textile sector. Cotton Consumption H0: There is a significant relationship between Cotton Consumption and the growth of textile sector. H1: There is an insignificant relationship between Cotton Consumption and the growth of textile sector. Number of Looms H0: There is a significant relationship between Number of Looms and the growth of textile sector. H1: There is an insignificant relationship between Number of Looms and the growth of textile sector. Number of Spindles H0: There is a significant relationship between Number of Spindles and the growth of textile sector. H1: There is an insignificant relationship between Number of Spindles and the growth of textile sector. TECHNIQUES Simple statistical technique of Multiple Regression will be used for the analysis of this secondary data. Multiple regressions will explain the effect of independent variables on growth of textile sector. DATA ANALYSIS For analyzing the data statgraphics will be used. Alongside explaining the relationships between variables and the amount of variation that each variable is causing, it will also provide the graphical analysis in graphical forms. DATA INTERPRETATION Statistical software such as Statgraphics which will be used in this thesis to interpret data. The P-values indicate the validity of the model and of each independent variable and the R-squared will explain the degree of variation caused in the growth of the textile sector through the variables Number of Looms, Number of Spindles, Yarn Production, Raw Cotton consumption and Raw Cotton production. CHAPTER 4 RESULTS AND ANALYSIS The dependent variable is growth of textile industry and the independent variables that are micro-environmental include Yarn Production, Consumption of Raw Cotton, Cotton Production, the total number of spindles and the total number of looms in Pakistan. The Yarn production has been chosen as an independent variable because theoretically speaking the production quantity of yarn is directly proportional to the quantity of cloth that is produced. After that the consumption of Raw Cotton has been chosen as an independent variable because it is a significant representation of the quantity of cotton that stays in the economy and is consumed by the population of Pakistan and not exported to other countries. Although the consumption of cotton specifies both the mill and non-mill usage of cotton, the non-mill usage of cotton is insignificant because it mostly represents the uses of cotton without any value addition for instance usages of raw cotton for domestic uses such as cotton balls used in infirmaries for patients. So most of the cotton consumption technically shows the amount of cotton that is processed in mills to produce cloth or textile. The Cotton Production again is a vital independent variable because it is directly proportional to the growth of the textile sector. The cotton produced is first ginned to separate the fiber from the seed, the fiber goes on to be twined and twisted to produce yarn and the yarn is then used to produced cloth so higher the quantity of cotton produced in an economy, the more the textile industry is liable to produce cloth. Multiple Regression analysis has been used as the statistical tool to develop and judge the degree of significance of the relationship between the dependent variable and five independent variables. The Regression equation is: Growth of Textile = -20.4196 + 0.00338711*Consumption of Raw Material + 0.00128728*Number of Looms + 0.00227119*Number of Spindles + 0.0191763*Raw Cotton Production + 0.00932286*Yarn Production The dependent variable (Y) over here in the above mentioned equation is the Growth of Textile Industry which is being predicted or explained. The independent variable represented by (X) explains the Variance in Y. Every independent variable has its own beta coefficient that explains the relative importance. The beta coefficient explains the relative change in the dependent variable if the independent variable is changed by 1%. All variables show a positive relationship which is correct because all other independent factors are positively related to the dependent variable that is Growth of Textile Industry. If we analyze the beta coefficients, a one percent change in the Number of Looms would cause a .0012 percent growth in the textile industry, if there is a one percent increase in the Number of Spindles it will cause a 0.022 percent growth in the textile industry. Equally if there is a one percent increase in the yarn production it would cause a 0.009 percent increase in the growth of the textile industry. A one percent increase in the consumption of raw cotton would increase the growth of the textile industry by 0.03 percent, which is a significant percentage. Lastly, the one percent change in cotton production would cause a 0.019 percent increase in the growth of the textile industry. The R-Squared statistic indicates that the model as fitted explains 95.5788 percent of the variability in Growth of Textile. The adjusted R-squared statistic, which is more suitable for comparing models with different numbers of independent variables, is 91.1576%. The P-value of the model is 0.0021. Since the P-value is less than 0.01, there is a statistically significant relationship between the variables at the 99 percent confidence level. The individual p-values of the independent variables will determine the relationship between each independent variable and the dependent variable. If the value is above 0.1 then the relationship is insignificant and the alternate hypothesis will be rejected. According to the model, Number of Spindles and Yarn Production have p-values less than 0.1. The p-value of Number of Spindles is 0.0070 and the p -value of Yarn Production is 0.0022. Hence the null hypothesis (H0) for these two variables are rejected and the alternate hypothesis (H1) will be accepted. According to the results, the p-value of Consumption of Raw Materials, Number of Looms and Raw Cotton Production is more than 0.1 so the null hypothesis for these variables is accepted and the alternate hypothesis will be rejected.